Where gate back run space is restricted the ZABAG KOMBI TZ gate can provide the solution. When using a 2-part telescopic sliding gate, the opening space is reduced to approx. 83% of the passage.
The KOMBI TZ is a very economic and efficient solution. The gate consists of two primary leaves, running parallel and carrying a third leaf between them. All three gate leaves are made from steel.
The drive remains stationary in a drive column matching gate height. Thanks to the special drive technology, the three leaves are running at different speeds, so that their current end positions are reached at the same time.
Of course, all gates are delivered completely pre-assembled to ensure a fast and cost-saving installationon site.
Clear opening up to 18 m
Gate frame height up to 2.4 m
(larger sizes and special heights upon request)
All ZABAG sliding gates are equipped with active safety buffers at all main and side closing edges.
| Corrosion protection | System 3Plus - All steel parts are shot blasted, hot zinc sprayed, powder primed and then powder coated to the finished colour. This special finish ensures high resistance to damage caused by ultraviolet light, scratches, chemicals or oil. Hot dip galvanising is also available if specified. |
|---|---|
| Colour | as required, to a RAL standard colour chart |
| Drive system | GfA drive (size according to the gate dimension and frequency of use) complete with manually adjustable clutch |
| Control panel | ZABAG-control panel FU 15.5 or rather 27.5 with integrated inverter for soft start and soft stop will guarantee a fast, silent and low-wear movement. |
| Drive transmission | sprocket (with automatic height adjustment) and resilent roller chain mounted in the c-profile |
| Gate speed | 0.2 m/s |
| Safety equipment | in accordance with DIN EN 12453 |
| Produced | in accordance with DIN EN 13241 |
| Certification | ISO 9001 : 2015 |
