Cantilevered sliding gates
Sliding gates do not necessarily have to be made from steel. Cantilevered gates made from aluminium are an interesting alternative to traditional ways of securing private and commercial property or objects that are publicly accessible. Clearance widths of up to 12.0 m are implementable independent of road characteristics and slope. In addition, there is no need for tracks, rollers or foundations in the clear opening.
In combination with well-engineered and individually configurable control and safety technology, electrically-operated gates ensure highest ease of use providing drives with sufficient power reserve in accordance with all legal safety requirements.
ZABAG cantilevered sliding gate systems type KOMBI ALU are delivered preinstalled and therefore ensure quick and cost-saving installation on site. Effortless gate movement is guaranteed by rollers perfectly adjusted to the special extruded support profile made from highly pressure-resistant special polyamide, minimising wear at the same time.
Clear opening up to 12 m
Gate frame height up to 2.4 m
- cross fall adjustments according to recommendations of various gate associations
- special infills and coatings
- serrated top edges or spikes
- sheet steel infill with company logo by laser-cut out
Due to the gate leaf weight which is approx. 2/3 less compared to a steel gate, aluminium gates may be operated manually with ease and minimum effort.
All ZABAG sliding gates are equipped with active safety buffers at all main and side closing edges.
|Corrosion protection||System 3Plus - All steel parts are shot blasted, hot zinc sprayed, powder primed and then powder coated to the finished colour. This special finish ensures high resistance to damage caused by ultraviolet light, scratches, chemicals or oil. Hot dip galvanising is also available if specified.|
|Colour||as required, to a RAL standard colour chart|
|Drive system||400 V drive ZA-MO, duty ratio of 100 %, class S1 with highly user-friendly emergency release|
|Control panel||ZABAG-control panel FU 15.5 or rather 27.5 with integrated inverter for soft start and soft stop will guarantee a fast, silent and low-wear movement.|
|Drive transmission||sprocket and toothed rack module 4 attached to the bottom beam|
|Gate speed||approx. 0.32 m/s|
|Safety equipment||in accordance with DIN EN 12453|
|Produced||in accordance with DIN EN 13241|
|Certification||ISO 9001 : 2015|